Apple Motion 3 - Manual (Page 877)

Chapter 10 Using Filters 877
Midtone Green: Picks the color gain applied to the midtone range of the green color
channel.
Midtone Blue: Picks the color gain applied to the midtone range of the blue color
channel.
Highlight Red: Picks the color gain applied to the highlights of the red color channel.
Highlight Green: Picks the color gain applied to the highlights of the green color
channel.
Highlight Blue: Picks the color gain applied to the highlights of the blue color channel.
Mix: Sets what percentage of the original image is blended with the filtered image.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the mix
control.
Color Reduce
Reduces the full range of color in an image down to two, three, or four colors that you
select. Depending on the number of substitute colors you choose in the Reduce To
parameter, this filter breaks down the full range of colors in the image into a color
range for each Match Color parameter that’s available. It then substitutes the selected
Replace With color for each interpreted range of color.
If two colors are selected, all color information in the object is reduced to the selected
two colors; if three, they are reduced to three; and so on.
Parameters in the Inspector
Smoothness: Sets the smoothness of the transitions between the reduced areas.
Values range from 0 (hard edges) to 1 (smooth blending).
Original image Color Reduce defaults applied