Apple Motion 3 - Manual (Page 931)

Chapter 10 Using Filters 931
Bad TV
This filter simulates poor analog television reception, adding attributes like
exaggerated video field scan lines, static and roll. This filter causes rasterization in 3D
groups.
Parameters in the Inspector
Waviness: Sets the amount of horizontal offset applied to the video fields. Values
range from 0 to 200.
Roll: Sets the amount of vertical offset applied to the image. The entire image is
displayed, but the image is split along the roll line, with the otherwise missing part of
the footage shown joined along the roll line.
Static: Sets the amount of static added to the image. Values range from 0 to 1.0.
Color Synch: Sets the amount of horizontal RGB channel offset applied to the image.
Values range from 0 to 1.0.
Saturate: Sets the amount of color saturation applied to the image. Negative values
reduce saturation, positive values add saturation. Values range from –100 to 100.
Scan Line Brightness: Sets the brightness of the video field scan lines added to the
image. Value range from 0 to 5.
Scan Line Thickness: Sets the thickness of the video field scan lines added to the
image. Values range from 0 to 100.
Scan Line Distance: Sets the distance between each of the video field scan lines
added to the image. Values range from 1 to 100.
Mix: Sets the amount of the filtered frame to be mixed with the original source frame.
Values range from 0 to 100%.
Original image Bad TV applied