Apple Motion 3 - Manual (Page 943)

Chapter 10 Using Filters 943
Paper Color: Sets the color of the paper. The color picker can be expanded with the
disclosure triangle to include Red, Green, Blue, and Alpha sliders to more precisely
select the color.
Paper Opacity: Sets the opacity of the paper. Values range from 0 to 1.
Ink Color: Sets the color of the ink used in the line drawing.
Mix: Sets the amount of the filtered frame to be mixed with the original source frame.
Values range from 0 to 100%.
HUD Controls
The HUD contains the same controls as the Inspector, with the exception of the Mix
control.
Line Screen
This filter reduces an image to a high-contrast grayscale version of itself. It then screens
it using a pattern of straight lines, simulating a sort of etched screening technique. The
image is represented by varying thicknesses in the pattern of the parallel lines.
This filter causes rasterization in 3D groups.
Parameters in the Inspector
Center: Sets the position of the center of the hatched screen.
Angle: Sets the angle of the hatched screen.
Scale: Sets the scale of the hatched screen. Values range from 1 to 100.
Skew: Sets the amount of skew of the hatched screen. Values range from –3 to 3.
Stretch: Sets the amount the hatched screen is stretched. Values range from –2 to 2.
Contrast: Sets the relative amount of contrast between light and dark areas. Values
range from 0 to 0.99.
Original image Line Screen applied