Lenze E94A - Manual (Page 97)

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
97
3 Working with the FB editor
3.7 Copying complete interconnection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.7 Copying complete interconnection
This function will be available as of »Engineer« V2.9!
In contrast to copying/inserting selected interconnection elements via the clipboard, the function
described in this chapter serves to replace the current FB interconnection of a device completely by
the FB interconnection of another project device.
A complete interconnection comprises:
• ApplicationTask, UserTask and IdleTask:
• Function blocks (instances and parameter values)
• System blocks (application and parameter values)
• Port blocks (application)
• Variables (variable declaration and value)
• User codes (user code declaration and value)
• Connections (fixed connections, MUXer and their setting)
• Comments
• Interconnection layout (arrangement of the modules)
• Global configuration:
• Activation status
• Task configuration
• Port definition of the ports used in the FB interconnection

How to copy the complete interconnection into another project device:
1. Select the application with the FB interconnection to be copied in the project view.
2. Select the command Application dataCopy FB interconnections....
3. Go to project view and select the application which is to be inserted into the copied FB in-
terconnection.
4. Select the command Application dataAdd FB interconnection....
• The command can only be activated if an FB interconnection has been copied from a de-
vice of the same device type and version.
• After the command has been executed, the module assembly is compared. If there are
relevant deviations, the insertion is refused and a corresponding message is displayed.
• If an insertion is possible, you are asked if the FB interconnection is to be inserted.
5. Confirm the question if the copied FB interconnection is to be inserted with Yes.
• After the insertion, an update of the project is required.

Note!
The complete FB interconnection can only be copied between devices of the same device
type and version (e.g. 9400 HighLine V3).