139 l_sdspeedfilter - speed signal delay, L_sdspeedfilter, 5function blocks – Lenze E94A User Manual
Page 522
5
Function blocks
5.139
L_SdSpeedFilter - speed signal delay
522
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.139
L_SdSpeedFilter - speed signal delay
This FB is used to filter or delay a speed signal according to the PT1 principle. The resulting position
loss is compensated by an internal overflow buffer.
Inputs
Outputs
Function library:
LenzeServoDrive
Runtime software licence:
Motion Control HighLevel
Motion Control TopLevel
Identifier/data type
Information/possible settings
dnSpeedIn_s
DINT
Speed selection in [rpm]
• 15000 rpm ≡ 2
26
≡ 67108864
bEnable
BOOL
Activate filter function
FALSE Filter is deactivated.
• Use these settings during the acceleration and deceleration pha-
ses to prevent a drifting of the position.
TRUE Filter is activated.
AxisData
Machine parameters
• For accepting the machine parameters of the drive/motor, connect this input
with the output DI_AxisData of the SB LS_DriveInterface.
• The machine parameters of a master drive can be displayed with the
FB
. In this case, the FB output AxisData must be connected to
this input.
Identifier/data type
Value/meaning
dnSpeedOut_s
DINT
Filtered speed in [rpm]
bLimitActive
BOOL
Status signal "Overflow/underflow"
TRUE An overflow/underflow has occurred.
GQ6SHHG2XWBV
/B6G6SHHG)LOWHU
$[LV'DWD
GQ6SHHG,QBV
E(QDEOH
E/LPLW$FWLYH
&
&
&
&
&
& 6SHHGXQLW
& 5HIHUHQFHVSHHG