Lenze E94A - Manual (Page 16)

2 Introduction
2.1 How to create applications:
16
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2 Introduction
2.1 How to create applications:
An application is the configured function of a device. To create an application for the controller, the-
re are two solutions:
1. You use a ready-made technology application supplied by Lenze.
• For this purpose, simply select the required technology application from the catalogue in the
»Engineer« for the controller.
• The selected technology application can be changed and extended by further functions, if re-
quired.
2. You create the application completely by yourself using the function block editor.
• For this purpose, select no application for the controller. In this case, an "empty application"
is assigned to the controller.