HP Intelligent Management Center Standard Software Platform - Manual (Page 384)

To choose a viewing angle for a 3D chart
• Right-click your chart, then select 3D Viewing Angle from the menu.
Using the zooming features with bar and line charts
On the Preview tab, you can find commands for zooming bar charts and line
charts within your report. You have the ability to zoom in and out on these
chart types at any time, with each time being referred to as instance-specific.
If you decide to save the instance of the chart that has been zoomed in or
out, you must save the data with the report.
To zoom in and out on a bar or line chart
1. On the Preview tab, right-click the bar or line chart to bring up the shortcut
menu.
2. On the shortcut menu, click Zoom In.
3. Drag the Zoom In cursor around a section of the chart to enclose it within
the tracking rectangle.
The chart zooms in to the section you selected.
4. Repeat the previous step to zoom in further.
Note:
To see adjacent areas on a zoomed-in chart view (neighboring bars in a
bar chart, for example), use the Pan option on the shortcut menu. Pull
the Pan cursor to the left or right to move in that direction.
5. To zoom out on a chart, right-click the chart to bring up the shortcut menu.
6. On the shortcut menu, click Zoom Out.
7. With the Zoom Out cursor, click the chart.
The chart zooms out one level of magnification.
8. Click the chart again to zoom out further.
384 Crystal Reports 2008 SP3 User's Guide
Charting 14
Working with charts