Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 636)

9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C02680
636 Firmware 1.37 - 09/2006
L
C02680
C02681
C02685
C02686
C02687
C02688
Parameter | Name:
C02680 | Source position setpoint
Data type: UNSIGNED_32
Index: 21895
d
= 5587
h
Basic function " Positioning "
Selection list (Lenze setting printed in bold)
0 Position setpoint input
1 From add. speed
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02681 | Additional speed source
Data type: UNSIGNED_32
Index: 21894
d
= 5586
h
Basic function " Positioning "
Selection list (Lenze setting printed in bold)
0 Additional speed input
1 From position setpoint
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02685 | PF_dnMotorAcc_x
Data type: INTEGER_32
Index: 21890
d
= 5582
h
Display of the motor acceleration of the basic function " Position follower " (LS_PositionFollower).
Display range (min. value | unit | max. value)
-7680000.0 7680000.0
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10
Parameter | Name:
C02686 | PF_dnSpeedAdd1_s
Data type: INTEGER_32
Index: 21889
d
= 5581
h
Display of the speed precontrol value of the basic function " Position follower " (LS_PositionFollower).
Display range (min. value | unit | max. value)
-480000.0 rpm 480000.0
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10
Parameter | Name:
C02687 | Position follower: % signals
Data type: INTEGER_32
Index: 21888
d
= 5580
h
Display of the scaled signals of the basic function " Position follower " (LS_PositionFollower).
Display range (min. value | unit | max. value)
-200.00 % 200.00
Subcodes Information
C02687/1 PF_dnSpeedAdd2_n
C02687/2 PF_dnTorqueAdd_n
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 100
Parameter | Name:
C02688 | Position follower: Pos. signal
Data type: INTEGER_32
Index: 21887
d
= 557F
h
Display of the position signals of the basic function " Position follower " (LS_PositionFollower).
Display range (min. value | unit | max. value)
-214748.3648 Incr. 214748.3647
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10000