Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 438)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Logbook
438 Firmware 1.37 - 09/2006
L
15.3.3 Reading logbook entries
With an online connection, the existing logbook entries can simply be displayed in the
»Engineer«. Alternatively, the logbook entries can also be read via the corresponding
parameters (e.g. using the keypad).
M
How to display logbook entries in the »Engineer«:
1. Go to the Project view and select the 9400 HighLine controller whose logbook
entries are to be read.
2. Click the icon or select the command OnlineGo online to build up an online
connection with the controller.
3. Select the Diagnostics tab from the Workspace.
4. Click Logbook.
• The Logbook dialog box appears:
• Click Delete to delete an entry from the logbook.
• Click Export to export the entries from the logbook into a *.log file.
• Activating the Hide system messages checkbox, hides all "Information" system
messages in the logbook.
5. Click Previous to close the Logbook dialog box.