Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 619)

L
Firmware 1.37 - 09/2006 619
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C02541
C02541
C02542
C02543
C02547
C02548
Parameter | Name:
C02541 | Max. accel. to be displayed
Data type: INTEGER_32
Index: 22034
d
= 5612
h
Drive interface
Display range (min. value | unit | max. value)
-214748.3647 Unit/s² 214748.3647
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10000
Parameter | Name:
C02542 | Load reference speed
Data type: UNSIGNED_32
Index: 22033
d
= 5611
h
Drive interface
Display range (min. value | unit | max. value)
0.000 rpm 4294967.295
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1000
Parameter | Name:
C02543 | Load reference torque
Data type: UNSIGNED_32
Index: 22032
d
= 5610
h
Drive interface
Display range (min. value | unit | max. value)
0.000 Nm 4294967.295
; Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1000
Parameter | Name:
C02547 | DI_dnState
Data type: INTEGER_32
Index: 22028
d
= 560C
h
Status of the drive interface (LS_DriveInterface).
Display range (min. value | unit | max. value)
-2147483648 2147483647
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02548 | DI_bErrors
Data type: UNSIGNED_32
Index: 22027
d
= 560B
h
Display of the boolean error signals of the drive interface (LS_DriveInterface).
Selection list
0 FALSE
1 TRUE
Subcodes Information
C02548/1 DI_bResetError1
C02548/2 DI_bResetError2
C02548/3 DI_bResetError3
C02548/4 DI_bSetExternError
; Read access Write access CINH PLC STOP No transfer COM MOT