Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 611)

L
Firmware 1.37 - 09/2006 611
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C01209
C01209
C01210
C01211
C01212
C01213
C01214
C01501
Parameter | Name:
C01209 | Counter: housing overtemp.
Data type: UNSIGNED_16
Index: 23366
d
= 5B46
h
Display range (min. value | unit | max. value)
0 65535
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C01210 | Electrolyt. capacitor av. temp.
Data type: UNSIGNED_8
Index: 23365
d
= 5B45
h
Display range
(min. value | unit | max. value)
0 255
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C01211 | Service code
Data type: UNSIGNED_32
Index: 23364
d
= 5B44
h
This code is used internally by the controller and must not be overwritten by the user!
Parameter | Name:
C01212 | Counter: power section overload
Data type: UNSIGNED_16
Index: 23363
d
= 5B43
h
Display range (min. value | unit | max. value)
0 65535
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C01213 | Service code DataFlash
Data type: UNSIGNED_32
Index: 23362
d
= 5B42
h
This code is used internally by the controller and must not be overwritten by the user!
Parameter | Name:
C01214 | Internal clock
Data type: VISIBLE_STRING
Index: 23361
d
= 5B41
h
System time of the controller in the format "dd/mm/yyyy hh:mm:ss"
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C01501 | Resp. to comm. error with MXI1
Data type: UNSIGNED_32
Index: 23074
d
= 5A22
h
Response to communication error between "intelligent" module in module slot 1 and basic device
Selection list
(Lenze setting printed in bold)
0 No response
1 Error
3 Quick stop by trouble
4 Warning locked
5 Warning
; Read access ; Write access CINH PLC STOP No transfer COM MOT