Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 492)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
492 Firmware 1.37 - 09/2006
L
ProjectList.dat file missing [0x008c0004]
DeviceCFG.dat file missing [0x008c0005]
ProjectSelection.dat file invalid [0x008c0006]
ProjectList.dat file invalid [0x008c0007]
DeviceCFG.dat file invalid [0x008c0008]
Project is not loaded [0x008c0009]
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Reformat memory module ( C00002 ="1030") and repeat
project download.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Application could not be loaded because of a file error. Load new or different application.