Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 234)

9400 HighLine | Parameter setting & configuration
Technology applications (TAs)
Overview
234 Firmware 1.37 - 09/2006
L
TA "Actuator – torque" (C 265)
• Slave drives for material transport
–Chain conveyors
–S-shaped frame structure
–Bilateral tandem drives
• Test facilities
–Test benches for tensile stress
–Motor test benches
–Brake assemblies
• Support of higher-level technology solutions for e.g.
traction-controlled winders
Available in every license stage.
The technology application can be
selected in the »Engineer«
application catalog.
TA "Electronic gearbox" (C 297)
• Slitters
• Calender drives
• Line drives
• Conveying belts
• Vibrators
• Roller mills
• Stretching machines
• Wire drawing machines
License stage Motion Control
HighLevel or higher required.
The technology application can be
selected in the »Engineer«
application catalog.
TA "Synchronism with mark synchronisation" (C 332)
• Printing units
• Asynchronous cross cutters
• Perforating machines
• Insetters
• Vibrating drives
• Line drives
• Labelling machines
License stage Motion Control
HighLevel or higher required.
The technology application can be
selected in the »Engineer«
application catalog.
TA "Multi-purpose positioning" (C 371)
Note: In this TA the sequence control is carried out through the controller.
• Transport units
• Rotary tables
• Storage and retrieval units
• Feed drives
• Dosing machines
• Hoists
License stage Motion Control
TopLevel or higher required.
The technology application can be
selected in the »Engineer«
application catalog.
TA "Table positioning" (C 411)
Note: This TA requires an external sequence control.
• Transport units
• Rotary tables
• Storage and retrieval units
• Feed drives
• Dosing machines
• Hoists
Available in every license stage.
The technology application can be
selected in the »Engineer«
application catalog.
Technology application/application ranges Required license/delivery