Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 459)

L
Firmware 1.37 - 09/2006 459
9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
User task 4: Overflow [0x006a0007]
User task 5: Overflow [0x006a0008]
User task 6: Overflow [0x006a0009]
User task 7: Overflow [0x006a000a]
User task 8: Overflow [0x006a000b]
User task 9: Overflow [0x006a000c]
Runtime error [0x006a000d]
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 4 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 5 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 6 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 7 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 8 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Program runtime in user task 9 is too high. See remedy for " Overflow of user task 1 ".
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
A run-time error has occurred in the application. The
application processing has been interrupted.
Remove run-time error in the application and retransmit
the application to the controller.