Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 494)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
494 Firmware 1.37 - 09/2006
L
MXI1: Ethernet module missing or incompatible [0x008c0011]
MXI2: Ethernet module missing or incompatible [0x008c0012]
MXI1: Digital frequency module missing or incompatible [0x008c0013]
MXI2: Digital frequency module missing or incompatible [0x008c0014]
MXI1: ICM module missing or incompatible [0x008c0015]
MXI2: ICM module missing or incompatible [0x008c0016]
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The communication module E94AYCEN (Ethernet) in the
module receptacle MXI1 is incompatible with the
application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The communication module E94AYCEN (Ethernet) in the
module receptacle MXI2 is incompatible with the
application.
Use communication module supported by the
application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The digital frequency extension module in module
receptacle MXI1 is incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The digital frequency extension module in module
receptacle MXI2 is incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The ICM extension module in module receptacle MXI1 is
incompatible with the application.
Use extension module supported by the application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
The ICM extension module in module receptacle MXI2 is
incompatible with the application.
Use extension module supported by the application.