Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 60)

9400 HighLine | Parameter setting & configuration
Drive interface
System block "LS_DriveInterface"
60 Firmware 1.37 - 09/2006
L
4.7 System block "LS_DriveInterface"
The system block LS_DriveInterface displays the drive interface in the function block
editor.
Inputs
Input
DIS code | Data type
Information/possible settings
DI_bSetCInh
C02549/1 | BOOL
Set/remove controller inhibit (C 44)
TRUE Set controller inhibit.
DI_bResetError1
C02548/1 | BOOL
DI_bResetError2
C02548/2 | BOOL
DI_bResetError3
C02548/3 | BOOL
Error message reset (acknowledgement)
• This function resets an active error message, if the cause of the error message has
been eliminated.
• The three inputs are linked via a logic OR gate.
TRUE Reset (acknowledge) error message.
DI_bSetExternError
C02548/4 | BOOL
Activation of error message "External error".
Monitoring of external events (C 44)
TRUE Activate fault message with the response selected in C00581 .
DI_bSwitchOn
C02549/4 | BOOL
Deactivate switch-on inhibit
• If the automatic restart is inhibited ( C00142 = "0"), the state machine remains in
the "Device is ready to switch on" state after mains switching.
State "Device is ready to switch on" (C 47)
FALSEÊTRUE The switch-on inhibit is deactivated and the controller changes to
the "Device is switched on" device state.
LS_DriveInterface
DI_dnState DI_bSetCInh
DI_bResetError1
DI_bSetExternError
DI_bSwitchOn
DI_bReadyToSwitchOn
DI_bReady
DI_bFailActive
DI_bImpActive
DI_bCInhActive
DI_bUVDetected
DI_bMainSupplyOk
DI_bWarningActive
DI_bOVDetected
DI_bOperationEnabled
³ 1
DI_bResetError2
DI_bResetError3
DI_dwErrorCode
DI_AxisData