Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 559)

L
Firmware 1.37 - 09/2006 559
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00159
C00159
C00166
C00167
C00168
C00169
C00171
Parameter | Name:
C00159 | Quick stop by (source)
Data type: BITFIELD_16
Index: 24416
d
= 5F60
h
Value is bit-coded:
Bit 0 Reserved
Bit 1 Reserved
Bit 2 Reserved
Bit 3 Reserved
Bit 4 Application
Bit 5 Controller command
Bit 6 Error response
Bit 7 Internal PLC
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C00166 | Error status
Data type: VISIBLE_STRING
Index: 24409
d
= 5F59
h
Error message for error number indicated in C00168
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C00167 | Service code
Data type: VISIBLE_STRING
Index: 24408
d
= 5F58
h
This code is used internally by the controller and must not be overwritten by the user!
Parameter | Name:
C00168 | Error number
Data type: UNSIGNED_32
Index: 24407
d
= 5F57
h
Display of the error number of the first error with highest priority
Display range
(min. value | unit | max. value)
0 4294967295
; Read access Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C00169 | Logbook event filter
Data type: UNSIGNED_32
Index: 24406
d
= 5F56
h
Bit coded word for the filtering of system events (fault, warning, info)
• A set filter bit inhibits entry into the log file.
Setting range
(min. value | unit | max. value) Lenze setting
0 4294967295 0
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C00171 | Service code
Data type: UNSIGNED_32
Index: 24404
d
= 5F54
h
This code is used internally by the controller and must not be overwritten by the user!