IAI America XSEL-S - Manual (Page 474)

Chapter 7
Troubleshooting
7.3 Error List (MAIN application)
466
In the panel window, the error numbers follow E in the display.
Error
No.
Error name Description, action, etc.
E8D Parameter flash-ROM status error Data is not written to the flash ROM correctly or written in
an old, incompatible application version.
Cold-st
art
lev
el
errors E8F Fieldbus logic error Invalid logic during Fieldbus initialization.
In the panel window, the error numbers follow E in the display.
Error
No.
Error name Description, action, etc.
F00 Shutdown error (hi_sysdwn ()
definition)
A shutdown error (hi_sysdwn () definition) was detected.
F03 to
F58
Shutdown error (OS call error) A shutdown error (OS call error) was detected.
F60 System-down level error-call
procedure error
A system-down level error-call procedure error was
detected.
F61 Interpreter-task end task ID error An interpreter-task end task ID error was detected.
F62 Abnormal standby power detection
error
Abnormal standby power was detected.
F63 Regenerative resistance
temperature error
A regenerative resistance temperature error was detected.
F64 AC-power overvoltage error An AC-power overvoltage error was detected.
F65 Motor-power overvoltage error A motor-power overvoltage error was detected.
F66 Servo control underrun error A servo control underrun error was detected.
F67 FROM-write bus width error A write operation other than 32-bit long word access was
detected while writing the flash ROM.
F68 FROM write protect error Write operation to a write-protected flash ROM area
(FRMWE bit in DEVCTR = 1) was detected.
F69 Boot watchdog error A FPGA boot watchdog was detected. The core program
may not be running properly.
F6A�
FA0
Undefined exception/interruption
error
An undefined exception/interruption occurred.
FB0 TMU0 interruption error TMU0 interruption error was detected.
FB1 Application code SDRAM copy
error (Checksum)
The sum of 4 bytes does not match between the
corresponding sections after FROM � SDRAM program
copy.
FB2 Installed flash ROM type mismatch
(Application)
The flash ROM type anticipated in the software does not
match the flash ROM type actually installed. Check the
combination of software and hardware.
FB8 Undefined NMI error An undefined NMI interruption occurred.
S
ys
te
m
-d
ow
n
le
ve
l e
rro
r
FF0 to
FFF
Shutdown error (hi_sysdwn()
definition)
A shutdown error (hi_sysdwn() definition) was detected.