IAI America XSEL-S - Manual (Page 292)

Chapter 6 Parameter
6.1 I/O Parameter (All types)
284
I/O Parameter (All types)
No. Parameter name
Default
value
(reference)
Input
range
Unit Remarks
38 Input function selection 008 1 0 to 5
0: General-purpose input,
1: Program number specified for program start
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
291, “Port number assigned to input
function selection 008.”
39 Input function selection 009 1 0 to 5
0: General-purpose input,
1: Program number specified for program start
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
292, “Port number assigned to input
function selection 009.”
40 Input function selection 010 1 0 to 5
0: General-purpose input,
1: Program number specified for program start
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
293, “Port number assigned to input
function selection 010.”
41 Input function selection 011 1 0 to 5
0: General-purpose input,
1: Program number specified for program start
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
294, “Port number assigned to input
function selection 011.”
42 Input function selection 012 1 0 to 5
0: General-purpose input,
1: Program number specified for program start
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
295, “Port number assigned to input
function selection 012.”
43 Input function selection 013 1 0 to 5
0: General-purpose input
1: Program number specified for program start
2: Error reset (ON edge)
Note: The assignment changes depending on
the value set in “I/O parameter No. 30,
Input function selection 000.”
Note: The port number assigned to this function
can be changed using I/O parameter No.
296, “Port number assigned to input
function selection 013.”