IAI America XSEL-S - Manual (Page 450)

Chapter 7
Troubleshooting
7.3 Error List (MAIN application)
442
In the panel window, the error numbers follow E in the display.
Error
No.
Error name Description, action, etc.
A2B Program-run command refusal
error in AUTO mode
Programs cannot be run from the TP/PC software
connector in the AUTO mode.
A2C Program number error The program number is invalid.
A2D Inactive program resumption error A resumption request was received for a program currently
not running.
A2E Inactive program pause error A pause request was received for a program currently not
running.
A2F Breakpoint error The step number specified as a breakpoint is invalid.
A30 Breakpoint setting-count
specification error
The number of breakpoints to be set exceeds the limit
value.
A31 Parameter change value error The value of parameter changed is invalid.
A32 Parameter type error The parameter type is invalid.
A33 Parameter number error The parameter number is invalid.
A34 Card-parameter buffer read error Error reading the card-parameter buffer
A35 Card-parameter buffer write error Error writing the card-parameter buffer
A36 Parameter change refusal error
during operation
Parameters cannot be changed during operation (program
is running, servo is in use, etc.).
A37 Card manufacturing/function
information change refusal error
The card manufacturing/function information cannot be
changed.
A38 Parameter change refusal error
during servo ON
An attempt was made to change a parameter whose
change is not permitted while the servo is ON.
A39 Non-acquired card parameter
change error
An attempt was made to change a parameter for a card not
recognized at reset.
A3A Device number error The device number is invalid.
A3C Memory initialization type
specification error
The specified memory initialization type is invalid.
A3D Unit type error The unit type is invalid.
A3E SEL write data type specification
error
The specified SEL write data type is invalid.
A3F Flash-ROM write refusal error
during program run
The flash ROM cannot be written while a program is
running.
A40 Data change refusal error during
flash ROM write
Data cannot be changed while the flash ROM is being
written.
A41 Duplicate flash-ROM write
commands refusal error
Another flash-ROM write command was received while the
flash ROM was being written.
A42 Direct monitor prohibition error
during flash ROM write
Direct monitor is prohibited while the flash ROM is being
written.
A43 P0/P3-area direct monitor
prohibition error
Direct monitor in the P0/P3 areas is prohibited.
A44 Position-data count specification
error
The specified number of position data is invalid.
A45 Symbol-record count specification
error
The specified number of symbol records is invalid.
A46 Variable-data count specification
error
The specified number of variable data is invalid.
A48 Error-detail query type 1 error Error-detail query type 1 is invalid.
A49 Error-detail query type 2 error Error-detail query type 2 is invalid.
M
es
sa
ge
le
ve
l e
rro
rs
A4A Monitoring data type error The data type for monitoring data query is invalid.