IAI America RCS3PCR-SS8C User Manual
Iai america, inc
ROBO Cylinder
RCS2/RCS3 Actuators
Slider Type
Operating Manual
Eighteenth Edition
IAI America, Inc.
Motor Straight Type(Coupling Type):
RCS2- SA4C, SA5C, SA6C, SA7C, SS7C, SS8C
RCS3- SA8C, SS8C
Motor Straight Type (Built-in Type):
RCS2- SA4D, SA5D, SA6D
Standard Type
Motor Reversing Type):
RCS2- SA4R, SA5R, SA6R, SA7R, SS7R, SS8R
RCS3- SA8R, SS8R
Motor Straight Type(Coupling Type):
RCS2CR- SA4C, SA5C, SA6C, SA7C, SS7C, SS8C
RCS3CR- SA8C, SS8C
Cleanroom Type
Motor Straight Type(Built-in Type):
RCS2CR- SA5D, SA6D
High-precision Type Motor Straight Type (Coupling Type): RCS3P- SA8C, SS8C, SA8R, SS8R
High-precision Cleanroom Type Motor Straight Type(Coupling Type): RCS3PCR- SA8C, SS8C
Standard Type
Standard Type
Cleanroom Type
This manual is related to the following products:
- RCS3PCR-SA8C RCS3CR-SS8C RCS3CR-SA8C RCS3P-SS8C RCS3P-SA8C RCS3-SS8C RCS3-SA8C RCS2CR-SS8C RCS2CR-SS7C RCS2CR-SA7C RCS2CR-SA6D RCS2CR-SA6C RCS2CR-SA5D RCS2CR-SA5C RCS2CR-SA4C RCS2-SS8R RCS2-SS8C RCS2-SS7R RCS2-SS7C RCS2-SA7R RCS2-SA7C RCS2-SA6R RCS2-SA6D RCS2-SA6C RCS2-SA5R RCS2-SA5D RCS2-SA5C RCS2-SA4R RCS2-SA4D RCS2-SA4C
Table of contents
Document Outline
- Cover
- Please Read Before Use
- Note
- Table of Contents
- Safety Guide
- Handling Precautions
- International Standards Compliances
- Names of the Parts
- 1. Checking the Product
- 2. Specification
- 3. Life
- 4. Installation and Storage/Preservation Environment
- 5. Installation
- 6. Connection with Controllers
- 7. Setting the Home
- 8. Slit for Position Adjustment
- 9. Options
- 9.1 Brake
- 9.2 Foot Bracket
- 9.3 High Acceleration/Deceleration Option
- 9.4 Home Check Sensor
- 9.5 Reversed Home Specification
- 9.6 Slider Roller Specification
- 9.7 Slider Spacer
- 9.8 Motor Reversed to Left, Motor Reversed to Right
- 9.9 Changing the Cable Exit Direction
- 9.10 Changing the Motor Reversing Direction (Left/Right) and Cable Exit Direction
- 9.11 Suction Joint on Opposite Side
- 9.12 No Suction Joint
- 10. Motor/Encoder Cables
- 11. Maintenance and Inspection
- 11.1 Inspection Items and Schedule
- 11.2 Visual Inspection of the Machine Exterior
- 11.3 Cleaning
- 11.4 Adjusting the Stainless Sheet
- 11.5 Interior Inspection
- 11.6 Internal Cleaning
- 11.7 Adding Grease
- 11.8 Replacing/Adjusting the Stainless Sheet
- 11.9 Reduction Belt [Motor Reversing Type]
- 11.10 Replacing the Motor
- 12. Appendix
- 13. Warranty
- Change History