IAI America XSEL-S User Manual
Page 413
Chapter 7
Troubleshooting
7.1
Action to Be
Taken upon Occurrence of Problem
405
Establish the clock setting using a teaching tool such as the PC software at the
first time the power is supplied to the controller.
[Refer to an instruction manual of a teaching tool such as the PC software for how
to establish the clock setting.]
Once the clock setting is established, the data can be retained for approximately
ten days with the power to the controller being off. Without the setting conducted
or when clock data is lost, the system starts with the time at 00h00m January 1,
2000 at the power being turned on.
�
Even if the time data is lost, a generated error
code can be retained.
The alarms applicable for this function are those stated in Section 8.4 Alarm. Any
error which may occur in a teaching tool such as the PC software is not included.
Note 1:� To handle a trouble, the cause is to be narrowed down by getting rid of the things
that can certainly be considered as normal. Please check all the items mentioned
in 1) to 11) before making a contact with us.