IAI America ISPDACR-ESD User Manual

Is series actuator operating manual

IS Series Actuator

Operating Manual

Dust-proof Type

ISD ISDA ISPDA

Cleanroom Type

ISDCR ISPDCR ISDACR ISPDACR

Cleanroom Type, Antistatic Specification

ISDACR-ESD

Seventh

Edition

This manual is related to the following products:

ISPDACR ISPDA ISDACR-ESD ISDACR ISDA

Table of contents

Document Outline

Please Read Before Use
CE Marking
Table of Contents
Safety Guide
Handling Precautions
Names of the Parts
1. Checking the Product
- 1.1 Components
- 1.2 Operation Manuals for Controllers Supported by This Product
- 1.3 How to Read the Model Nameplate
- 1.4 How to Read the Model
2. Specification
3. Life
4. Installation and Storage/Preservation Environment
- 4.1 Installation Environment
- 4.2 Storage/Preservation Environment
5. Installation
- 5.1 Installation
- 5.2 Installing the Actuator
- 5.3 Installing the Slider
- 5.4 Mounting Surface
- 5.5 Using T-slots
- 5.6 Suction for the Cleanroom Type
6. Connecting the Controller
- 6.1 Wiring
7. Setting the Home Position
- 7.1 Home Return
- 7.2 Fine-tuning the Home Position
- 7.3 Changing the Home Direction
- 7.4 How to Use the Homing Mark Stickers
8. Options
- 8.1 AQ Seal
- 8.2 Brake
- 8.3 Reversed-home Specification
- 8.4 Guide with Ball Retention Mechanism
- 8.5 Suction Joint on Opposite Side
9. Motor/Encoder Cables
- 9.1 Standard
- 9.2 CE Specification (Option Indicated by “EU” in Model Number
10. Maintenance/Inspection
- 10.1 Inspection Items and Intervals
- 10.2 Visual Inspection of the Machine Exterior
- 10.3 External Cleaning
- 10.4 Adjusting the Stainless Sheet
- 10.5 Interior Check
- 10.6 Cleaning the interior
- 10.7 Adding Grease
11. Replacement/Adjustment Procedure for Stainless Sheet
12. Motor Replacement Procedures
- 12.1 Replacing the Motor of the Standard Type ISDA/ISPDA/ISDACR/ISPDACR Series
- 12.2 Replacing the Motor of the ISDACR/ISPDACR Series
- 12.3 How to Set the Home Preset and Home Return Offset
13. Appendix
- 13.1 External Dimensions
14. Warranty
- 14.1 Warranty Period
- 14.2 Scope of Warranty
- 14.3 Honoring the Warranty
- 14.4 Limited Liability
- 14.5 Conditions of Conformance with Applicable Standards/Regulations, Etc., and Applications
- 14.6 Other Items Excluded from Warranty
15. Change History