IAI America XSEL-S - Manual (Page 321)

Chapter 6 Parameter
6.1 I/O Parameter (All types)
313
I/O Parameter (All types)
No. Parameter name
Default
value
(reference)
Input
range
Unit Remarks
478
User-Defined Memory Block
Attribute 3 (Memory Block No.
5)
0 0 to 65535 (Same as I/O parameter No. 462)
479
User-Defined Memory Block
Attribute 4 (Memory Block No.
5)
0 0 to 65535 (Same as I/O parameter No. 463)
480
User-Defined Memory Block
Attribute 1 (Memory Block No.
6)
0
0H to
FFFFFFFFH
(Same as I/O parameter No. 460)
481
User-Defined Memory Block
Attribute 2 (Memory Block No.
6)
0 0 to 65535 (Same as I/O parameter No. 461)
482
User-Defined Memory Block
Attribute 3 (Memory Block No.
6)
0 0 to 65535 (Same as I/O parameter No. 462)
483
User-Defined Memory Block
Attribute 4 (Memory Block No.
6)
0 0 to 65535 (Same as I/O parameter No. 463)
484
User-Defined Memory Block
Attribute 1 (Memory Block No.
7)
0
0H to
FFFFFFFFH
(Same as I/O parameter No. 460)
485
User-Defined Memory Block
Attribute 2 (Memory Block No.
7)
0 0 to 65535 (Same as I/O parameter No. 461)
486
User-Defined Memory Block
Attribute 3 (Memory Block No.
7)
0 0 to 65535 (Same as I/O parameter No. 462)
487
User-Defined Memory Block
Attribute 4 (Memory Block No.
7)
0 0 to 65535 (Same as I/O parameter No. 463)
488
User-Defined Memory Block
Attribute 1 (Memory Block No.
8)
0
0H to
FFFFFFFFH
(Same as I/O parameter No. 460)
489
User-Defined Memory Block
Attribute 2 (Memory Block No.
8)
0 0 to 65535 (Same as I/O parameter No. 461)
490
User-Defined Memory Block
Attribute 3 (Memory Block No.
8)
0 0 to 65535 (Same as I/O parameter No. 462)
491
User-Defined Memory Block
Attribute 4 (Memory Block No.
8)
0 0 to 65535 (Same as I/O parameter No. 463)
492 (For expansion) 0
493 (For expansion) 0
494 (For expansion) 0
495 (For expansion) 0
496 (For expansion) 0
497 (For expansion) 0
498 (For expansion) 0
499 (For expansion) 0
500 (For expansion) 0
501 Number of RC-gateway
position data points
128 0 to 512
Number of position data used in the RC position
data mode within the X-SEL.
502
Maximum axis number for
definition of RC-gateway
position data
0 0 to 15
Maximum axis number used for reserving RC-axis
position data areas in the user-data backup
memory
503
Number of position data points
for definition of RC-gateway
position data
0 0 to 512
If the number of position data points for allocating
RC-axis position data area in the user-data
backup memory is 0, no area is allocated.
If a value other than 0 is set, areas will be
reserved regardless of whether the RC gateway
function is enabled or disabled.