35 unbind/bind ethernet module mxi2, Unbind/bind ethernet module mxi2, 4drive interface – Lenze 9400 User Manual
Page 82
4
Drive interface
4.2
Device commands
82
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.35
Unbind/bind Ethernet module MXI2
The
= "102: Unbind/bind Ethernet module: MXI2" device command is used to reinitialise
the Ethernet interface of an Ethernet communication module in module slot MXI2, e. g. to accept a
newly set IP or gateway address without mains switching.
Tip!
Detailed information on the Ethernet communication module (E94AYCEN) can be found in
the "Ethernet" Communication Manual.
Possible status displays for this device command
Related device commands
Unbind/bind Ethernet module MXI1
Status (
Meaning
6718722 Device command in process
6684672 Device command executed successfully
6684673 General fault