Lenze 9400 - Manual (Page 636)

13 Diagnostics & fault analysis
13.7 Error messages of the operating system
636
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
New application loaded [0x006a0003]
ApplicationTask: Overflow [0x006a0004]
UserTask: Overflow [0x006a0005]
IdleTask: Overflow [0x006a0006]
Module ID (decimal) Error ID (decimal)
106: Runtime environment for IEC 61131-3 programs 3
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Application has been changed by transmission from
Engineer or loading from the memory module.
- (Information only)
Module ID (decimal) Error ID (decimal)
106: Runtime environment for IEC 61131-3 programs 4
Response (Lenze setting printed in bold) Setting: C02111 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Program runtime in Application task is too high. Reduce program runtime by means of:
• Omitting functions (e.g. by reducing the number of
active FBs).
• Optimisation of functions to the calculating time.
Module ID (decimal) Error ID (decimal)
106: Runtime environment for IEC 61131-3 programs 5
Response (Lenze setting printed in bold) Setting: C02111 ( Adjustable response)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Program runtime in user task is too high. Reduce program runtime by means of:
• Omitting functions (e.g. by reducing the number of
active FBs).
• Optimisation of functions to the calculating time.
Module ID (decimal) Error ID (decimal)
106: Runtime environment for IEC 61131-3 programs 6
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Program runtime in idle task is too high. Reduce program runtime by means of:
• Omitting functions (e.g. by reducing the number of
active FBs).
• Optimisation of functions to the calculating time.