14 parameter reference – Lenze 9400 User Manual
Page 732
14
Parameter reference
14.2
Parameter list | C00003
732
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19922944 Device command executed successfully
19922945 General fault
19956740 File could not be opened.
19956765 Fault while reading out of a file.
19956766 Fault while writing into a file.
19956768 Unexpected end of file.
19956994 Device command in process
19963905 Access to file has been denied since the file is already
accessed from another position
19963909 I/O fault when accessing the file system
19963916 RAM is full
19963917 Access authorisation denied
19963932 No free memory on the memory module
32833536 Device command executed successfully
32833537 General fault
32867586 Device command in process
32875521 No cam data available on the memory module
32875523 Loading of the cam data failed
32875525 Checksum error
32875542 Wrong password entered
32875545 The cam functionality is deactivated
32899072 Device command executed successfully
32899073 General fault
32933122 Device command in process
32941057 No cam data to be saved are available in the RAM of the
controller
32941060 Saving of the cam data failed
32941078 Wrong password entered
32941081 The cam functionality is deactivated
32964608 Device command executed successfully
32964609 General fault
32998658 Device command in process
33006617 The cam functionality is deactivated
33030144 Device command executed successfully
33030145 General fault
33064194 Device command in process
33072153 The cam functionality is deactivated
67502080 Device command executed successfully
1030:
67502081 General fault
67536130 Device command in process
655360000 Device command executed successfully
655360001 General fault
655394050 Device command in process
720896001 General fault
720930050 Device command in process
Status
Meaning
Device command