Lenze 9400 - Manual (Page 440)

11 Basic drive functions
11.6 Homing
440
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.6.4 Overview of DS402 homing modes
This function extension is available from software version V3.0!
In addition to the homing modes described in the previous subchapter " Overview of the Lenze
homing modes ", from software version V3.0 also the homing modes described in the following can
be selected for a homing in C02640 , according to the DS402 device profile.
The switches/sensors are evaluated via the following internal interfaces:
DS402
homing method
Evaluated signals/sensors
Touch probe sensor/
encoder zero pulse
Travel range limit switch Reference switch at
HM_bHomingMark
Negative limit switch Positive limit switch
01  
02  
03  
04  
05  
06  
07   
08   
09   
10   
11   
12   
13   
14   
15 Reserved: no homing is executed.
16 Reserved: no homing is executed.
17 
18 
19 
20 
21 
22 
23  
24  
25  
26  
27  
28  
29  
30  
31 Reserved: no homing is executed.
32 Reserved: no homing is executed.
33 
34 
35 Direct reference setting.