Lenze 9400 - Manual (Page 11)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
11
1 About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
Target group
This documentation addresses to all persons who want to parameterise, configure, and diagnose
the 9400 HighLine controller by means of the engineering software L-force »Engineer« and the
keypad.
Validity
The information in this documentation are valid for the following standard devices:
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the 9400 HighLine and the software version of the engineering tools installed
(»Engineer« or » Easy Starter«), the screenshots in this documentation may deviate from the screen
representation.
Document history

Danger!
The controller is a source of danger which may cause death or serious personal injury.
In order to ensure protection against this danger, observe the safety instructions before
switching on the controller.
Please read the safety instructions in the mounting instructions and hardware manual
of the Servo-Inverter 9400 HighLine. Both instructions are included in the scope of
supply.
Product series Type designation from software version
9400 Servo Drives E94AxHExxxx 1.5
Version Description
10.0 11/2013 TD05 Error corrections; parameter reference V12.00.xx
9.0 12/2012 TD06 Extended by new functions for 9400 HighLine V11
8.0 12/2011 TD06 Extended by new functions for 9400 HighLine V10
7.1 10/2010 TD06 Error corrections & supplements
7.0 04/2010 TD06 Extended by new functions for 9400 HighLine V8
6.1 08/2009 TD05 Error corrections & supplements
6.0 08/2009 TD05 Extended by new functions for 9400 HighLine V7
5.2 01/2009 TD05 Error corrections & supplements
5.1 12/2008 TD05 Error corrections
5.0 11/2008 TD05 Extended by new functions for 9400 HighLine V5
4.1 07/2008 TD05 New main chapter: "CAN on board" system bus
4.0 06/2008 TD05 Supplemented with new functions for 9400 HighLine V4
3.0 11/2007 TD05 Supplemented with new functions for 9400 HighLine V3
2.0 05/2007 TD05 Extended edition
1.0 12/2006 TD05 First edition for 9400 HighLine V1.5