Lenze 9400 - Manual (Page 78)

4 Drive interface
4.2 Device commands
78
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.31 CAN module: Pred.Connect.Set
The C00002 = "94: CAN module: pred.connect.set" device command is used to set the basic
identifiers for the CANopen system bus interface of a CANopen communication module in module
slot MXI1 or MXI2 according to the "Predefined Connection Set" (DS301V402).

Tip!
Detailed information on the CANopen communication module (E94AYCCA) can be found in
the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
 CAN module: Reset node ( 76)
 CAN module: Identify node ( 80)
Status ( C00003 ) Meaning
6194434 Device command in process
6160384 Device command executed successfully
6160385 General fault