Lenze 9400 - Manual (Page 676)

13 Diagnostics & fault analysis
13.7 Error messages of the operating system
676
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Lenze setting loaded [0x00900001]
Parameter set saved [0x00900002]
Parameter set loaded [0x00900003]
Loading of Lenze setting failed [0x00900004]
Parameter set restored [0x00900005]
Module ID (decimal) Error ID (decimal)
144: Parameter manager 1
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Lenze setting has been loaded. - (Information only)
Module ID (decimal) Error ID (decimal)
144: Parameter manager 2
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Parameter set has been saved. - (Information only)
Module ID (decimal) Error ID (decimal)
144: Parameter manager 3
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Parameter set has been loaded. - (Information only)
Module ID (decimal) Error ID (decimal)
144: Parameter manager 4
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Lenze setting of a parameter is not within the valid
limits.
Eliminate error in the application and retransfer
application to controller.
Module ID (decimal) Error ID (decimal)
144: Parameter manager 5
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
An error has occurred while loading the selected
parameter set.
Transfer parameter set from Engineer to the controller
and save with C00002 ="11".