1 interface to the safety module, 11 basic drive functions – Lenze 9400 User Manual

Page 506

background image

11

Basic drive functions

11.11

Limiter

506

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11.11.1.1 Interface to the safety module

For the simple connection of the safety module to the application, the transmission of the currently

valid safety requirement(s) is effected in the form of a bit coded control signal via the following

interface:

[11-25] Interface to connect the safety module to the basic function "Limiter"

• It is also possible to make several requirements at the same time via the control signal, e.g.

manual jog with limited increment and limited speed 2.

• If no safety module is connected, the control signal can also be generated by means of a

converter block (FB L_DevSMControlEncoder).

LS_SafetyModuleInterface

SMI_dwControl

LS_Limiter

LIM_dwControl

This manual is related to the following products:

E94AxHExxxx