Lenze 9400 - Manual (Page 672)

13 Diagnostics & fault analysis
13.7 Error messages of the operating system
672
Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Required licence missing [0x008c000b]
Application and device are incompatible [0x008c000c]
MXI1: Module is missing or incompatible [0x008c000d]
MXI2: Module is missing or incompatible [0x008c000e]
Module ID (decimal) Error ID (decimal)
140: Application project manager 11
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Memory module could not be initialised. Two possibilities:
• Use Engineer to download and activate an application
suitable for the memory module.
• Switch off controller and use memory module
suitable for the application.
Module ID (decimal) Error ID (decimal)
140: Application project manager 12
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Application is incompatible with the controller. • Download of an application suitable for the controller
using Engineer.
• Switch off controller and use a different memory
module with suitable application.
Module ID (decimal) Error ID (decimal)
140: Application project manager 13
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Extension module in module slot MXI1 is incompatible
with the application.
Use extension module supported by the application.
Module ID (decimal) Error ID (decimal)
140: Application project manager 14
Response (Lenze setting printed in bold)
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Extension module in module slot MXI2 is incompatible
with the application.
Use extension module supported by the application.