Lenze 8400 - Manual (Page 890)

16 Parameter reference
16.2 Parameter list | C00731
890
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00731
C00732
C00734
C00735
C00736
C00740
C00741
C00742
C00743
Parameter | Name:
C00731 | Oscilloscope recording length
Data type: UNSIGNED_32
Index: 23844
d
= 5D24
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00732 | Oscilloscope command
Data type: UNSIGNED_8
Index: 23843
d
= 5D23
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00734 | Oscilloscope trigger channel selection
Data type: UNSIGNED_16
Index: 23841
d
= 5D21
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00735 | Oscilloscope channel source type
Data type: UNSIGNED_8
Index: 23840
d
= 5D20
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00736 | Oscilloscope data type/data width
Data type: UNSIGNED_16
Index: 23839
d
= 5D1F
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00740 | Oscilloscope offset variables
Data type: UNSIGNED_32
Index: 23835
d
= 5D1B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00741 | Oscilloscope trigger mode
Data type: UNSIGNED_8
Index: 23834
d
= 5D1A
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00742 | Oscilloscope trigger delay
Data type: INTEGER_16
Index: 23833
d
= 5D19
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00743 | Oscilloscope trigger level
Data type: UNSIGNED_32
Index: 23832
d
= 5D18
h
This code is for device-internal use only and must not be written to by the user!