1 following connections of inputs and outputs, Following connections of inputs and outputs 9, 17 working with the fb editor – Lenze 8400 User Manual

Page 1119

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05

1119

Working with the FB Editor

17.3

Using the FB Editor as "Viewer"

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

17.3.1

Following connections of inputs and outputs

In addition to the

you can use the context menu of inputs and outputs to follow

connections and quickly reach certain signals.



How to navigate from one output to another connected input:

1. Open the context menu (right mouse button) of the port symbol at the output.

• The context menu for the port symbol contains all inputs which are connected to the

output:

Select input in the context menu to which you want to navigate.

• As a result, the selected input is displayed in the centre of the drawing area (in this

example: nGPAnalogSwitchOut_a):