1 ls_analoginput, 2 ls_canmanagement, 3 ls_dataaccess – Lenze 8400 User Manual

Page 1431: 4 ls_devicemonitor, 5 ls_digitalinput, 6 ls_digitaloutput, Ls_analoginput 1, Ls_canmanagement 1, Ls_dataaccess 1, Ls_devicemonitor 1

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05

1431

Function library

18.2

System blocks | LS_AnalogInput

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

18.2.1

LS_AnalogInput

Interface to the analog input terminals.

18.2.2

LS_CANManagement

Control of internal functions of the CAN driver and display of the "Operational" status as well as the

node address.

18.2.3

LS_DataAccess

Only for Lenze-internal use.

18.2.4

LS_DeviceMonitor

Motor control status signals.

18.2.5

LS_DigitalInput

Interface to the digital input terminals.

18.2.6

LS_DigitalOutput

Interface to the digital output terminals.



For a detailed description see the main chapter "I/O terminals":



Internal interfaces | System block "LS_AnalogInput"

( 330)



For a detailed description see the main chapter "System bus CAN on board":



Internal interfaces | System block "LS_CANManagement"

( 699)



For a detailed description see the main chapter "Motor control (MCTRL)":



Internal status signals | System block "LS_DeviceMonitor"

( 300)



For a detailed description see the main chapter "I/O terminals":



Internal interfaces | System block "LS_DigitalInput"

( 318)



For a detailed description see the main chapter "I/O terminals":



Internal interfaces | System block "LS_DigitalOutput"

( 325)