4 time-based start of second speed, Time-based start of second speed, Time-based start of second speed ( 509) – Lenze 8400 User Manual
Page 509: 8basic drive functions (mck)
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
509
8
Basic drive functions (MCK)
8.7
Manual jog
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7.1.4
Time-based start of second speed
If this function has been activated by means of bit 1 in
and a waiting time > "0 s" has been
set in
, an automatic change-over to manual jog speed 2 takes place when the manual jog
function is activated and after the waiting time has expired.
• When the waiting time is set = 0 s, the automatic change-over is deactivated.
[8-29] Time-based start of second speed
Tip!
By leaving the corresponding button for manual jog pressed down for longer than the
waiting time and parameterising manual jog speed 2 so that it is higher than manual jog
speed 1, you can enable longer distances to be travelled by means of manual jogging with
this function.
Time-based start deactivated
(
- bit 1 = 0; Lenze setting)
Time-based start activated
(
- bit 1 = 1)
: Manual jog: Speed 1
: Manual jog: Speed 2
: Waiting time 2nd speed (Lenze setting: 5 s)
n
t
TRUE
FALSE
ManJogPos
t
n
t
TRUE
FALSE
ManJogPos
t