17 working with the fb editor – Lenze 8400 User Manual

Page 1136

Text mode
Original mode

Working with the FB Editor

17.4

Reconfiguring the predefined interconnection

1136

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Connection types
Connections can either be created by means of connection lines or port identifiers ("flags")

[17-8] Example 1: Connection via connection line

[17-9] Example 2: Connection via flags



Tip!
The commands Show as flag or Show as line in the context menu of a connection serve to

change the representation of the connection at any time.
When an output is connected to several inputs via flags, three points are displayed ("...") at

the output instead of the concrete input identifier. The context menu of the port symbol

shows all inputs which are connected to the output.