Lenze 8400 - Manual (Page 346)

7 Technology applications
346
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Technology applications
This chapter describes the handling and the functional range of the technology applications
available for the 8400 protec HighLine controller.
Related topics:
 Integrated technology applications ( 28)
 Commissioning of the "Actuating drive speed" technology application ( 55)
 Commissioning of the "Table positioning" technology application ( 63)
 Commissioning of the "Switch-off positioning" technology application ( 78)
Technology application "Actuating drive speed"
This technology application preset in
C00005 serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches, vibrators,
travelling drives, presses, machine tools, dosing systems.
 TA "Actuating drive speed" ( 348)
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks which are
normally controlled by a higher-level control via a fieldbus, e.g. transport facilities,
rotary tables, storage and retrieval units, feed drives, metering units, hoists.
Note: An external sequence control is required for this TA!
 TA "Table positioning" ( 375)
Technology application "Switch-off positioning"
This technology application is used to solve speed-controlled drive tasks which
require a pre-switch off or stopping at certain positions, e.g. roller conveyors and
conveying belts. The pre-switch off is implemented by connecting switch-off
sensors.
 TA "Switch-off positioning" ( 404)

Note!
Please note that the "StateLine" and "HighLine" device types differ with regard to the
number, functional range, and flexibility of the technology applications offered.