Lenze 8400 - Manual (Page 1144)

17 Working with the FB Editor
17.4 Reconfiguring the predefined interconnection
1144
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7. If there are still elements to be entered in the list, repeat steps 5 and 6 until all elements are
inserted as intended.
8. Press Close to stop the insertion and close the dialog box.
• You can also use or to close the dialog box if "Insert" is not active.
• The elements inserted into the target interconnection so far are maintained.
• The connections for the blocks inserted so far are inserted depending on the selected
option.