Lenze 8400 - Manual (Page 41)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
41
2 Introduction: Parameterising the controller
2.4 Device access protection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.4 Device access protection
This function extension is available from version 06.00.00!
Various tasks can be carried out via the functions of the device access protection:
• Password protection
• Only authorised persons (who know the password) are permitted to read/change all
parameters of the controller.
• Unauthorised persons (who do not know the password) are only granted access to the max.
32 parameters of the user menu.
• Device personalisation
• Only controllers and memory modules which are personalised with a specific binding ID can
be used for the system.

Note!
If password protection/device personalisation is used:
• Let the end customer know that Lenze can only provide limited service in case of
devices with access protection.
• Lenze cannot modify e.g. a replacement device via special access to make it work with
a personalised memory module.
• The keypad does not support the alpha-numeric entry of a password, thus the keypad
cannot be used for entry.