Lenze 8400 - Manual (Page 1430)

18 Function library
18.2 System blocks
1430
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Related topics:
 Overview of function blocks available ( 1154)
 Working with the FB Editor ( 1102)
LS_ParFree32 Output of 8 parameterisable 32-bit signals
• This SB is available from version 12.00.00.
 
LS_ParFreeUnit
LS_ParFreeUnit_2
Output of 16 parameterisable position signals with internal
conversion of [unit] in [increments]
• These SBs are available from version 12.00.00.
 
LS_ParReadWrite_1
...
LS_ParReadWrite_6
Reading/Writing of local parameters 
LS_PulseGenerator Output of 9 fixed frequencies and 1 parameterisable frequency 
LS_RetainData Selection and saving of retain data
• This SB is available from version 12.00.00.
 
LS_ServiceSwitch Output of the switching status of the optional service switch 
LS_SetError_1 Parameterisable responses to user-defined events are tripped
 Diagnostics & error management ( 553)

LS_SetError_2 
LS_SMInterface Interface to the integrated safety system 
LS_SyncManagement Output of status information for synchronising the internal time
base
 Synchronisation of the internal time base ( 707)
 
LS_TouchProbe Interface for touch probe detection
 Touch probe detection ( 331)
• This SB will only be available from version 06.00.00.

LS_WriteParamList Interface to the basic "Parameter change-over" function
 Parameter change-over ( 718)

System block Function can be inserted into
level:
I/O Appl.