Lenze 8400 - Manual (Page 830)

16 Parameter reference
16.2 Parameter list | C00448
830
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00448
C00449
C00455
Parameter | Name:
C00448 | DigOut decoupling value
Data type: UNSIGNED_16
Index: 24127
d
= 5E3F
h
From version 02.00.00
Definition of the value the digital output terminals are to have in the decoupled state.
• Bit set = HIGH level
 Configuring exception handling of the output terminals
Setting range (min. hex value | max. hex value) Lenze setting
0x0000 0xFFFF 0x0000 (decimal: 0)
Value is bit-coded: ( = bit set)
Bit 0  Reserved
Bit 1  DigOut1_ON
Bit 2  DigOut2_ON
Bit 3  Reserved
Bit 4  Reserved
Bit 5  BrakeRelease_ON
Bit 6  Reserved
Bit 7  Reserved
Bit 8  Reserved
Bit 9  Reserved
Bit 10  Reserved
Bit 11  Reserved
Bit 12  Reserved
Bit 13  Reserved
Bit 14  Reserved
Bit 15  Reserved
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C00449 | FreqInxx_dnOut_p
Data type: INTEGER_32
Index: 24126
d
= 5E3E
h
From version 06.00.00
 Output of the encoder position of the DI1/DI2 frequency input
Display range (min. value | unit | max. value)
-2147483647 Incr. 2147483647
Subcodes Info
C00449/1 FreqIn12_dnOut_p
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00455 | FB_call table
Data type: UNSIGNED_16
Index: 24120
d
= 5E38
h
This code is for device-internal use only and must not be written to by the user!