Lenze 8400 - Manual (Page 568)

9 Diagnostics & error management
9.6 Logbook
568
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.6.4 Reading out logbook entries
With an online connection, the existing logbook entries can easily be displayed in the »Engineer«.
Alternatively, the logbook entries can also be read out via the corresponding parameters (e.g. using
the keypad).

How to display logbook entries in the »Engineer«:
1. In the Project view, select the 8400 protec HighLine controller.
2. Click the icon or select the OnlineGo online command to build up an online
connection with the controller.
3. Select the Diagnostics tab from the Workspace.
4. Click Logbook.
Example: Representation of the logbook in the »Engineer« V2.13
Button Function
Reset filters Reset set filter criteria to display all available logbook entries.
Export... Export the entries available in the logbook into a *.log file.
 Exporting logbook entries to a file ( 569)
File in project File the current logbook in the Engineer project to be able to access it offline,
too.
 Storing the logbook in the project ( 570)
Delete Delete all entries available in the logbook.
Configure... Open parameterisation dialog for configuring the logbook.