Lenze 8400 - Manual (Page 561)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
561
9 Diagnostics & error management
9.4 Drive diagnostics with the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to diagnose a drive with the »Engineer«:
1. In the Project view, select the 8400 protec HighLine controller.
2. Click the icon or select the OnlineGo online command to build up an online
connection with the controller.
3. Select the Diagnostics tab.
• With an online connection, the Diagnostics tab displays current status information
about the controller.

Tip!
The online connection to the controller can be established via the following device
interfaces:
• Diagnostic interface X70
•
CANopen option ( 629)
• PROFIBUS/PROFINET option ( 700)