Lenze 8400 - Manual (Page 1376)

18 Function library
18.1 Function blocks | L_PhiIntegrator_1
1376
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.1.138.1 Function
The nSet_v input value is evaluated, integrated and output as 16-bit value ( nOut16) and 32-bit
value dnOut32_p) with the gearbox factors wGearNum and wGearDenom.
• Evaluation of the gearbox factor is remainder considered.
• A positive or negative overflow of the integrator is signalised by a TRUE signal (for a task cycle)
at the bOvfl16 output for the nOut16 output or at the bOvfl32 output for the dnOut32_p output.
[18-59] Signal characteristic
nOut16 nOut16 nSet_v wGearNum
wGearDenom
------------------------------------ ⋅ + =
dnOut32_p dnOut32_p nSet_v wGearNum
wGearDenom
------------------------------------ ⋅ + =
1 2 3 4 5 6
Signal
t
1x Taskcycl 1x Taskcycl 1x Taskcycl
1x Taskcycl 1x Taskcycl
7 8 9 10
dn _p
t 4
TPPosition
dnTPPosition_p
t 7
2 -1 15/ 31
0
dnLoadVal_p
-2 15/ 31
bTPReceived
bLoad
bReset
bOvflxx
bInitDone