Lenze 8400 - Manual (Page 338)

6 I/O terminals
6.4 Configuring exception handling of the output terminals
338
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.4 Configuring exception handling of the output terminals
This function extension is available from version 02.00.00!
Exception handling for the digital output terminals in the event of an error can be set via decoupling
configuration and decoupling values.
• Bit coded selection is carried out in C00447 , defining the events that will trigger decoupling.
• Bit-coded definition is carried out in C00448 specifying the status of the output terminals when
being decoupled (bit set = HIGH level):
Related topics:
 Configuring exception handling of the CAN PDOs ( 656)
Bit Event
Bit 0  SafeTorqueOff
Bit 1  ReadyToSwitchOn
Bit 2  SwitchedOn
Bit 3  Reserved
Bit 4  Trouble
Bit 5  Fault
Bit 6  Reserved
Bit 7  Reserved
Bit 8  Reserved
Bit 9  Fail CAN_Management
Bit 10  Reserved
... ...
Bit 15  Reserved
Bit Output terminal
Bit 0  Reserved
Bit 1  DigOut1_ON
Bit 2  DigOut2_ON
Bit 3  Reserved
Bit 4  Reserved
Bit 5  BrakeRelease_ON
Bit 6  Reserved
... ...
Bit 15  Reserved