Lenze 8400 - Manual (Page 1004)

16 Parameter reference
16.2 Parameter list | C01235
1004
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01235
C01236
C01237
Parameter | Name:
C01235 | MCK: Manual jog waiting times
Data type: UNSIGNED_16
Index: 23340
d
= 5B2C
h
Waiting times for manual jog
 Manual jog
Setting range (min. value | unit | max. value)
0.000 s 65.000
Subcodes Lenze setting Info
C01235/1 5.000 s Manual jog: Waiting time 2nd speed
• Time after which the first manual speed ( C01231/1 ) is
accelerated to the second manual speed ( C01231/2 ).
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C01236 | MCK: Speed follower
Data type: INTEGER_32
Index: 23339
d
= 5B2B
h
Speeds for position follower
 Position follower
Setting range (min. value | unit | max. value)
-214748.3647 units/s 214748.3647
Subcodes Lenze setting Info
C01236/1 360.0000 units/s PosFollower: Sync. speed
• Synchronisation speed for approaching the setpoint
position of the master.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000
Parameter | Name:
C01237 | MCK: Acceleration follower
Data type: INTEGER_32
Index: 23338
d
= 5B2A
h
Accelerations for position follower
 Position follower
Setting range (min. value | unit | max. value)
-214748.3647 units/s2 214748.3647
Subcodes Lenze setting Info
C01237/1 720.0000 units/s2 Pos follower: Sync. accel.
• Acceleration for ramp-up to synchronisation speed.
C01237/2 720.0000 units/s2 Pos follower: Sync. decel.
• Deceleration for synchronisation speed ramp-down
to standstill (to the setpoint position of the master).
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000