Lenze 8400 - Manual (Page 1443)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
1443
18 Function library
18.2 System blocks | LS_MotionControlKernel
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter
18.2.14 LS_MotionControlKernel
Interface to the basic drive functions implemented in Motion Control Kernel (MCK).
18.2.15 LS_MotorInterface
Interface to internal motor control.
Parameter Possible settings Info
C00727/1...8 0 1 Keypad digital values
• Execution of control commands
for keypad operation
• See the "Outputs" table for the
meaning of the individual
subcodes
C00728/1...3 -199.99 % 199.99 Analog values - keypad
• Specification of various setpoints
for keypad operation
• See the "Outputs" table for the
meaning of the individual
subcodes

For a detailed description see the main chapter "Basic drive functions":
 Internal interfaces | System block "LS_MotionControlKernel" ( 439)

For a detailed description see the main chapterl "Motor control (MCTRL)":
 Internal interfaces | System block "LS_MotorInterface" ( 294)