Lenze 8400 - Manual (Page 482)

8 Basic drive functions (MCK)
8.4 Basic settings
482
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operating mode
If the limit for the following error in
C01215/x is set higher than "0.0000 units" and if the current
following error exceeds this limit over the time set in C01244/x :
• The error response set in C00595/5 or C00595/6 will be carried out (Lenze setting: "Warning").
• The error message " Ck05: Error, following error 1 " or " Ck06: Error, following error 2 " will be
entered into the logbook.
• The status output bFollowErrLim1 or bFollowErrLim2 at the SB LS_MotionControlKernel is set to
TRUE.